For OpenBSD patch branch information, please refer here.
For errata on a certain release, click below:
You can also fetch a tar.gz file containing all the following patches.
This file is updated once a day.
The patches below are available in CVS via the
OPENBSD_2_1 patch branch.
For more detailed information on how to install patches to OpenBSD, please
consult the OpenBSD FAQ.
CD RELEASE WORKAROUND
One of the install scripts has a flaw that makes the CD-ROM mount fail
when using the CD-ROM as the install source media.
To workaround this use the following sequence of commands before
starting the install script. This must be done each time the install
kernel is booted if the install script is to be run and the CD-ROM
is the media to install from. Do the following at the shell prompt:
# ed install.sub
For architectures where the install scripts start automatically
(like amiga), you need to abort it at the (I)nstall or (U)pdate
prompt by pressing Ctrl-C before doing the above command. After
that you can restart the install by:
CD RELEASE WORKAROUND
CD2 does not boot on the alpha, as had been planned. Instead, you
must use the floppy install method. This is not significantly
BOOT BLOCK BUG
Some rarer PC BIOSs do not like the hardrive bootblocks when used
as a MBR. The symptom is that the BIOS says "READ ERROR" when booting,
but everything suggests it should work fine. In those cases, it is
sufficient to install OS-BS or some other primary bootloader as the main
MBR, then install OpenBSD in a partition all by itself starting at a
non-zero offset. For instance, start OpenBSD at next track boundary or so.
The i386/X11/SUMS.md5 file contains 4 incorrect MD5 checksums.
These have been corrected on the ftp mirrors. The correct lines are:
MD5 (X33doc.tgz) = 6aa0be7987f9a3cf32a63b5ea9a83b39
MD5 (X33html.tgz) = 6ba39d41aef7c75c35a0533275c6f8c0
MD5 (X33ps.tgz) = ea49fc1b12c17fc16ece7d0e4ad4ee06
MD5 (RELNOTES) = 689fda20596a4eb82f86ded51efb01f4
A lot of people with IDE disk drives fail to read the
INSTALL.i386 document, and hence end up with geometry translation
problems. Read the document, please.
The amiga install has a flaw wrt Tseng based graphic cards: when entering
multiuser mode the console won't get a login prompt. This is due to
a problem in the shipped /dev/MAKEDEV script. To fix, enter single
user mode and do:
# cd /dev
# sh MAKEDEV ttye6
The sparc X11R6.3 xdm-config files reference /usr/X11R6.3/... This is
to X11R6.3's default config file contents. To fix, su and
# cd /usr
# ln -s X11R6 X11R6.3
The sparc "single floppy install disk" has a problem when you specify
"dumb" in response to the terminal type query. As a work-around
first specify an invalid terminal such as "bogus" and when prompted
again for a terminal type, enter "dumb" and it will work correctly.
When netbooting an older sparc system such as a Sun4 or Sun4c, the boot
may hang up at the end of the tftp transfer of the bootstrap due
to the tftp transfer working in 512-byte blocks. If this occurs
create a "padded" version of the bootstrap (boot or zboot) as follows:
# cd /tftpboot
# dd if=boot of=newboot obs=512 conv=osync
# mv newboot boot
The sparc install script has two flaws that make the kernel copy
and the bootblock install fail. The kernel copy only fails
then installing from CD-ROM. To workaround this use the
following sequence of commands before starting the install
script. This must be done each time the install kernel is
booted if the install script is to be run and the CD-ROM is
the media to install from. Do the following at the shell
If you install from CD-ROM do the following:
# ed install.md
... or if you plan to use the bsd.scsi3 kernel you should use instead:
# ed install.md
The following one you'll have to do always (not only then
installing from CD-ROM)
# ed /usr/mdec/binstall
When using the X11R6 binaries from the 2.1 release you will get
mkfontdir: undefined symbol: 'astpending' 12
Segmentation fault (core dumped)
this is due to a little problem affecting the compatibility between
the OpenBSD/arc port (on which the X11R6 clients were build) and
OpenBSD/pmax. You can work around this problem by using the arc
version of the shared libc instead of the pmax one. Once you have the
OpenBSD/arc 2.1 libc.so.16.1, do the following:
# cd /usr/lib
# mv libc.so.16.1 original_libc.so.16.1
# cp /where_you_have_downloaded_it_to/libc.so.16.1 .
# chown root.bin libc.so.16.1
# chmod 444 libc.so.16.1
Please be careful while doing this - because the libc is a very
sensitive part of the system. You can remove the original_libc.so.16.1
after the next reboot if everything is working fine.
The installer generates incorrect /etc/fstab files causing messages such
as "file system read-only" on bootup. To correct, boot to single-user
mode (by clicking that checkbox in the Booter's Booting:Options dialog)
and do the following:
# mount /dev/sd0a /
# ed /etc/fstab
1,$s/ ufs / ffs /
1,$s/ ro / rw /
Alternately, simply invoke vi or another editor and change the root filesystem
to be of type ffs rather than ufs and be rw (read-write) rather than ro
(read-only). In either case, you'll need to reboot the system afterwards.
Make this correction as soon as possible after installing the system.
The installer should not have specified the filesystem as the old
"ufs" type; the "ffs" type is more correct.
The installer forgets to install the kernel onto the filesystem.
This is because the installer expects all packages including the kernel to
be tar'ed and gzip'ed. The kernel was not shipped that way. Therefore, you
must make this correction before attempting to boot the system.
To correct, use the Installer mini-shell and do the following:
> cpin :[internal-macos-path]:bsd-generic bsd
This should place the kernel as /bsd on the filesystem. You should
replace the above string with the colon-delimited path from your desktop to
wherever you have placed the kernel. If possible, it is easiest to drag the
kernel into the same folder as the Installer, so you can simply issue a
command without leading colon(s) like:
> cpin bsd-generic bsd